Terraco Terrafix W32 Flexible Tile Adhesive 25kg – C2TE S1 Wall & Floor Tile Adhesive Grey

Terraco Terrafix W32 Flexible Tile Adhesive 25kg – C2TE S1 Wall & Floor Tile Adhesive Grey

SKU 75600-25KG Categories ,

£13.08 ex. VAT

excl VAT

Quantity:

4 in stock

You can now pay in 3 interest-free instalments with Klarna on checkout page.

Description

OVERVIEW PRODUCT GRADES/CODES Terrafix W32 is a flexible wall tile adhesive with excellent non-slump and extended open time characteristics. Terrafix W32 complies with the requirements as per EN12004 and passes all tests required for C2TE S1 classified adhesives. Terrafix W32 is suitable for interior and exterior walls for use on all types of masonry substrates such as sands/cement render, precast concrete, gypsum board, etc. Terrafix W32 is both hydraulically and organically bound, guaranteeing excellent adhesion of the tile to the surface.

PROPERTIES
• Excellent adhesion
• Non-slump
• Easy workability
• Water resistant
• Extended open time
• Flexible

AREAS OF USE
Fixing ceramic and stone on existing tiled surfaces, fixing tiling onto surface waterproofed with Terraco Weathercoat where an extended open time is required.

PREPARATION OF SURFACE
Ensure that the surface to be covered is clean and free of foreign matter. Absorbent and porous substrate should be wetted thoroughly with water prior to the application of Terrafix W32. Dusting surfaces should be treated with a penetrating primer.

MIXING
Add about 5,75- 6,25 litres of water to 25kg of Terrafix W32 and mix thoroughly to a thick and creamy consistency for 3-5 minutes with a high speed mixer. Let it stand for 5 minutes, remix and use.

APPLICATION & CLEANING OF TOOLS Apply Terrafix W32 in a layer approximately 3mm thick to the surface with the smooth side of a notched trowel. Pull the trowel through the applied layer with the notched edge. Push the tiles into place so that full adhesion is obtained. Fix tiles before the adhesive has surface dried. Plan work accordingly. Prepared material must be used within 1 hour. Clean tools and equipment with water after use.

SPACING OF JOINTS
To ensure even spacing, tile spacers of the required thickness are recommended.
GROUTING
Refer to Terragrout data sheet for details.
EXPANSION JOINTS Expansion joints, when necessary, should be incorporated in the design stage.
HEALTH & SAFETY Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.
PACKAGING & STORAGE
Terrafix W32 is supplied in 25kg craft bags. Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 12 months. Use oldest material first.

Safety information

Hazard classification (CLP Regulation (EC) No 1272/2008):

  • H318 – Causes serious eye damage
  • H315 – Causes skin irritation
  • H335 – May cause respiratory irritation

Wear suitable protective gloves and eye protection during application. Keep out of reach of children. Read the Safety Data Sheet before use: Download the Safety Data Sheet – Grey (PDF).

Transport: not classified as dangerous goods (ADR not applicable).

Additional information

Weight25 kg

Reviews

There are no reviews yet.

Be the first to review “Terraco Terrafix W32 Flexible Tile Adhesive 25kg – C2TE S1 Wall & Floor Tile Adhesive Grey”

Your email address will not be published. Required fields are marked *