PROPERTIES
• Flame-retardant (B-s2, d0 in acc. with DIN EN 13501) • Vapor-permeable (sd value: < 1 m)
• Immediately water-, driving rain- and airtight • UV-, weather- and bitumen-resistant • No need for additional mechanical fastening
• Neatly mouldable to the substrate, therefore easy and efficient application
• Flexible even at low temperatures; can be applied down to -5 °C
• EMICODE EC 1 PLUS certified
• Available on request: Product and manufacturer’s declarations according to DGNB, LEED and BREEAM
POSSIBLE USES
• Vapor-permeable and flexible sealing on the external side (weatherproofing level)
• For sealing connections between facade element and building shell against water and driving rain; for ensuring controlled water drainage
• For providing protection against moisture and enabling diffusion of residual construction moisture from the functional/insulation level to the outside
• Can be pre-installed on the frame/profile due to very high movement absorption and tear resistance
*Important: Without applicable FIRE PROTECTION REQUIREMENTS, if necessary, TEROSON AD KDS FR can be replaced 1:1 with TEROSON AD KDS. SUBSTRATE
PREPARATION
Clean the substrate before fixing the sealing strip. The areas to be sealed must be load-bearing, sound and free from dust, release agents, oil, grease, sintered layers and other substances that may impair adhesion. Deep hollows, e.g. rock pockets or shrinkholes in the concrete, must first be filled. All metal substrates, e.g. element surfaces of aluminium or zinc, must be free of oxide layers and release agents. At low temperatures make sure that the surfaces are free of ice crystals. Sharp or pointed irregularities must be removed. In the case of permeable substrates, e.g. coarse-pored exterior walls, it is necessary to apply a standard render (smooth trowel finish).
Reviews
There are no reviews yet.