S4Prime CP 50 POLYMER ADDED, SINGLE COMPONENT, PRIMER FOR EXPOSED CONCRETE SURFACES

S4Prime CP 50 is a high-performance, cement-based, single-component primer containing polymer additives. It is designed to enhance the bonding between exposed concrete surfaces and plaster mortars. This primer prevents rapid water loss from cement and gypsum-based plasters, increases workability, and extends the working time, making it ideal for both interior and exterior applications.

✅ Advantages:

• Easy and fast to apply
• Provides high bonding strength
• Prevents rapid water loss of cement and gypsum-based plasters
• Increases the workability and working time of plasters
• Suitable for use on horizontal and vertical surfaces

📌 Application Areas:

• Indoors and outdoors
• On walls and ceilings
• Before the application of gypsum and cement-based plasters on exposed concrete surfaces
• Before ceiling plastering and applications on old surfaces

⚙️ Technical Specifications:

🛠️ Application Instructions:

• Ensure the surface is dry, clean, and solid
• Mix with clean water until a homogeneous mixture is obtained
• Apply using a sponge roller
• For optimal results, apply two coats where necessary
• Allow 2–3 minutes of resting before use and remix for 1–2 minutes

⚠️ Warnings:

• Do not apply in weather conditions below +5°C or above +30°C
• Avoid application in humid, rainy, or windy conditions
• Do not apply on frozen, melting, or surfaces at risk of rain or frost within 24 hours

🧽 Cleaning & Storage:

• Clean tools with water immediately after use
• Store in a dry, moisture-free area, unopened, for up to 12 months

🧯 Safety:

• Wear protective clothing, gloves, and masks during application
• Avoid contact with eyes and skin
• Keep out of reach of children
• Consult the Safety Data Sheet (SDS) for more details