Description
Sprayplasters are acrylic based, ready to use compounds of inert filler materials, for use on all common types of interior building surfaces. They give a high quality, even surface for painting or other finishes. TERRACO Sprayplasters are suitable for both precast and conventional buildings. They can be applied directly to either new or old solid surfaces of pre-cast concrete, aerated concrete, sand/cement, fairfaced and level brickwork, etc. When used for finishing ceilings, the final coat may be left spray textured, in which case no further decoration is required. The finished Sprayplaster surface does not require priming before painting. TERRACO Sprayplaster is available in a range of grades for differing application thickness.
PROPERTIES TERRACO
Sprayplasters are ready-mixed for use compounds, formulated from a selected blend of acrylic polymers and precisely graded fillers. The products are: • Easy to use • Do not flake off
• Have high adhesion power
• Have high coverage
• Quick drying
• Vapour permeable
Basecoat For use on all types of construction substrates as a basecoat to level and rectify irregularities up to 10 mm thickness. Can be modified with Sprayplaster CM to give a harder, water resistant substrate. When modified, the plaster requires curing for up to 72 hours after application.
Finishcoat For use in all areas requiring up to 3mm coat thickness. For use as a finishing coat for Sprayplaster Basecoat. When used for finishing ceilings, the final coat may be left spray textured, in which case no further decoration is required.
Washable This is specially formulated water resistant version of Finishcoat for damp areas. AREA OF USE TERRACO Sprayplasters are suitable for both pre- cast and conventional buildings. They can be applied directly to either new or old solid surfaces of pre-cast concrete, aerated concrete, sand/cement, fairfaced and level brickwork, etc.
STOPPAGE OF WORK
When work stops for short periods, simply immerse the spray gun in water, wash around the top of machine and cover remaining Sprayplaster with a thin layer of water. When work resumes, remove the excess water from the machine and commence spraying.
APPLICATION & CLEANING OF TOOLS TERRACO
Sprayplaster is ready for use, but can be diluted with 2-3 % water if required. Patch and repair uneven/damaged surfaces. Spray the first coat and level with steel edged spatula. Excess material on the spatula should be returned to the machine. If required, apply a second coat of Sprayplaster Basecoat. Finish the surface with 1 or 2 coats of Sprayplaster Finishcoat. Clean tools and equipment with water after use.
HEALTH & SAFETY
Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet. PACKAGING & STORAGE Product is supplied in 25kg containers. Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 9 months. Use oldest material first.
Finishcoat 63410
Washable 63430
Basecoat63460
