Description
S4Floor AB 30 is a ready-to-use, acrylic-based, solvent-free adhesive designed for PVC and linoleum floor coverings. It provides a high bonding strength and is ideal for use in residential and commercial environments. This adhesive is especially suitable for floors subjected to heavy pedestrian traffic and is compatible with underfloor heating systems.
✅ Advantages:
- Ready to use and easy to apply
- Provides long working time
- High bonding strength
- Flexible structure
- Water-based and solvent-free
- Suitable for indoor applications
- Resistant to temperature changes
- Compatible with underfloor heating systems
📌 Application Areas:
- Indoors
- On horizontal surfaces
- Residences, hospitals, educational buildings, markets, shopping malls
- On leveled concrete slabs, prefabricated concrete, and cement-based screed surfaces
- For PVC-based homogeneous and heterogeneous floor tiles, linoleum, and rubber-based flooring applications
⚙️ Technical Specifications:
| Property | Value |
|---|---|
| Chemical Structure | Acrylic dispersion |
| Density | ~1.35 kg/lt (±0.1) |
| Thickening Time | 20-25 minutes |
| Shear Strength (EN 1373) | ≥ 0.3 N/mm² |
| Peel Strength (EN 1372) | ≥ 1.0 N/mm² |
| Dimensional Change (EN 1903) | ≤ 0.2% |
| Working Time | ~40-60 minutes |
| Set to Traffic | 24-48 hours |
| Consumption | 250-300 g/m² (depending on the tooth size, flooring type, and surface smoothness) |
🛠️ Application Instructions:
- The surface must be dry and free from contaminants such as dust, dirt, and oils
- The adhesive is ready to use; stir before application
- Spread the adhesive evenly using a triangular toothed notched trowel
- Wait for approximately 20-25 minutes before applying the floor covering material
- Use a cylindrical roller to ensure good adhesion and eliminate air gaps
⚠️ Warnings:
- Do not apply below +15°C or above +30°C
- Avoid application in high humidity, wet, or frozen conditions
- Do not add water or any other substances externally
- Do not exceed the maximum open working time of 35-45 minutes
- Ensure the underfloor heating is turned off 24 hours before application and turned on 72 hours after
🧽 Cleaning & Storage:
- Clean equipment with soapy water immediately after use
- Cured material can only be cleaned with thinner
- Store in a dry, frost-free environment, unopened, for up to 12 months
🧯 Safety:
- Wear protective clothing, gloves, and masks during application
- Avoid contact with eyes and skin
- Keep out of reach of children
- Consult the Safety Data Sheet (SDS) for more details
