Description
The advantages / Product description
The ready-to-use, extrudable joint mortar for the long-lasting closing of masonry joints.
Advantages
- The ready-to-use, sprayable joint mortar means that there is no need to add water or carry out time-consuming pre-mixing work. It enables clean, purposeful work. This means that you avoid dirtying surrounding areas and wasting material.
- Good adhesion even on slightly damp substrates practically allows for all-weather work and prevents forced interruptions.
- The structure of the high-quality water-based polymer has been perfectly designed with the visual appearance of the mortar in mind. This ensures a discreet joint and perfect appearance.
fischer Repair AC, the ready-to-use, paintable repairing mortar that has a variety of uses. These include renovating masonry, fixing roof tiles, sealing drill holes or general repair work. The practically odour-free mortar can be easily used due to its stable consistency. It provides very good resistance to weather, ageing and UV. The single-component polymer dispersion can be processed at temperatures between +5 °C and +40 °C, and is temperature-resistant between -30 °C and +75 °C. fischer Repair AC can also be reused. When in the cartridge, it is protected against frost at temperatures down to -15 °C.
Application and approval
Applications
- Repairing masonry joints
- Closing masonry cracks
- Repairing chipped edges
- Closing drill holes in facing masonry during repair work
- General repair work (e.g. drill holes with cracked edges)
- For a better reusability, to close opened cartridges with adhesive tape
Building materials
- Concrete
- Pumice
- Fibre cement
- Gypsum
- Wooden materials
- Sand-lime brick
- Ceramics
- Clinker brick
- Masonry
- Aerated concrete
- Plaster
- Cement
- Brick
You can find detailed information on building materials in the registration document.
Assembly instruction
Functionality
- Chemical base: 1C polymer dispersion
- Plastic
- Consistency: Firm
- Practically odour-free
- Skin formation time: Approx. 10 minutes.
- Processing temperature: +5 °C to +40 °C (not below +5 °C)
- Temperature resistance up to -30 °C (fully cured)
- Weather-proof after approx. 24 hours.
- Very good resistance to UV, weather and ageing
- Paintable
- Frost-protected in the cartridge
- Free of silicone, MDI and solvents
- Not recommended for caulking guns with a transmission ratio of less than 10:1 (e.g. KPM1)
Technical data
| Contents | 310 ml |
| Language on label | EN |
| Packaging | Cartridge |
| Amount | 1 pcs. |
| GTIN (EAN-Code) | 4048962192469 |
